Home Materials NiCr A286 Spring

NiCr A286 Spring

Material Type: NiCr A286
Material Group: Stainless Steel Wire

NiCr A286 Springs Description:

Cold drawn and precipitation hardened after fabrication. Good corrosion resistance at elevated temperatures. A Nickel-Chromium alloy with the addition of aluminum to give outstanding resistance to oxidation and other forms of high temperature corrosion with the ability to maintain high mechanical properties at elevated temperatures.

Available NiCr A286 Springs Material Forms
Wire: Yes    Strip: Yes    Sheet/Plate: Yes

Engineering Data

E Mpa 200,000 Min Size (in) 0.016
E psi 29,000,000 Max Size (in) 0.200
G Mpa 71,700 Min Size (mm) 0.400
G psi 10,400,000 Max Size (in) 5.000
Density g/cm3 8.030 Surface Min b
Density lb/in3 0.290 Max Temp °C 510
Conductivity 2 Max Temp °F 950

All materials specifications are provided for general reference purposes only.

NiCr A286 Springs Application:

NiCr A286 Springs Notes:

E Mpa Young's Modulus These factors can vary with cold work, heat treating and operational stress.
E psi
G Mpa Modulus of Rigidity
G psi
Conductivity % IACS
Surface Min Typical Surface Quality a Maximum defect depth: 0 to 0.5% of d or t
b Maximum defect depth: 1.0% of d or t
c Defect depth:less that 3.5% of d or t
Min Size Sizes commonly available for wire or strip Special sizes may be available at additional cost.
Max Size
Max Temp Maximum service temperature May vary due to operating stress