Home Materials 17-7 PH Spring

17-7 PH Spring

Material Type: 17-7 PH
Material Group: Stainless Steel Strip

17-7 PH Springs Description:

Cold rolled and precipitation hardened after fabrication. High strength and general purpose corrosion resistance. Magnetic in spring temper.

Available 17-7 PH Springs Material Forms
Wire: No    Strip: Yes    Sheet/Plate: Yes

Engineering Data

E Mpa 203,000 Min Size (in) 0.003
E psi 29,500,000 Max Size (in) 0.125
G Mpa 75,800 Min Size (mm) 0.080
G psi 11,000,000 Max Size (in) 3.000
Density g/cm3 7.810 Surface Min b
Density lb/in3 0.282 Max Temp °C 370
Conductivity 2 Max Temp °F 700

All materials specifications are provided for general reference purposes only.

17-7 PH Springs Application:

17-7 PH Springs Notes:

E Mpa Young's Modulus These factors can vary with cold work, heat treating and operational stress.
E psi
G Mpa Modulus of Rigidity
G psi
Conductivity % IACS
Surface Min Typical Surface Quality a Maximum defect depth: 0 to 0.5% of d or t
b Maximum defect depth: 1.0% of d or t
c Defect depth:less that 3.5% of d or t
Min Size Sizes commonly available for wire or strip Special sizes may be available at additional cost.
Max Size
Max Temp Maximum service temperature May vary due to operating stress