Home Materials Rene 41 Spring

Rene 41 Spring

Material Type: Rene 41
Material Group: N/A


A nickel base superalloy, nickel chromium cobalt, used in jet and rocket engines, afterburners and torque rings Contact us for Engineering data consistent with your design requirements.

Available Rene 41 Springs Material Forms
Wire: Yes    Strip: No    Sheet/Plate: No

Engineering Data

E Mpa 0 Min Size (in) 0.000
E psi 0 Max Size (in) 0.000
G Mpa 0 Min Size (mm) 0.000
G psi 0 Max Size (in) 0.000
Density g/cm3 0.000 Surface Min  
Density lb/in3 0.000 Max Temp °C 0
Conductivity 0 Max Temp °F 0

All materials specifications are provided for general reference purposes only.

Rene 41 Springs Application:

Rene 41 Springs Notes:

E Mpa Young's Modulus These factors can vary with cold work, heat treating and operational stress.
E psi
G Mpa Modulus of Rigidity
G psi
Conductivity % IACS
Surface Min Typical Surface Quality a Maximum defect depth: 0 to 0.5% of d or t
b Maximum defect depth: 1.0% of d or t
c Defect depth:less that 3.5% of d or t
Min Size Sizes commonly available for wire or strip Special sizes may be available at additional cost.
Max Size
Max Temp Maximum service temperature May vary due to operating stress