Material Type: Nitronic
Material Group: N/A
Nitronic Springs Description:
A heat resistant austenitic stainless, T S200000 series stainless steel with good corrosion resistance and strength which does not become magnetic when cold worked. Contact us for Engineering data consistent with your design requirements.
Available Nitronic Springs Material Forms
Wire: Yes Strip: No Sheet/Plate: No
Engineering Data
| E Mpa | 0 | Min Size (in) | 0.000 |
| E psi | 0 | Max Size (in) | 0.000 |
| G Mpa | 0 | Min Size (mm) | 0.000 |
| G psi | 0 | Max Size (in) | 0.000 |
| Density g/cm3 | 0.000 | Surface Min | |
| Density lb/in3 | 0.000 | Max Temp °C | 0 |
| Conductivity | 0 | Max Temp °F | 0 |
All materials specifications are provided for general reference purposes only.
Nitronic Springs Application:
Nitronic Springs Notes:
| E Mpa | Young's Modulus | These factors can vary with cold work, heat treating and operational stress. | |
| E psi | |||
| G Mpa | Modulus of Rigidity | ||
| G psi | |||
| Conductivity | % IACS | ||
| Surface Min | Typical Surface Quality | a | Maximum defect depth: 0 to 0.5% of d or t |
| b | Maximum defect depth: 1.0% of d or t | ||
| c | Defect depth:less that 3.5% of d or t | ||
| Min Size | Sizes commonly available for wire or strip | Special sizes may be available at additional cost. | |
| Max Size | |||
| Max Temp | Maximum service temperature | May vary due to operating stress | |
