Material Type: Nimonic 90
Material Group: N/A
Nimonic 90 Springs Description:
A nickel-chromium-cobalt alloy, precipitation hardenable with high stress-rupture strength. Widely used and proven alloy for high temperature conditions. Applications in aerospace and high temperature springs.
Available Nimonic 90 Springs Material Forms
Wire: Yes Strip: No Sheet/Plate: No
Engineering Data
| E Mpa | 227,000 | Min Size (in) | 0.000 |
| E psi | 33,000,000 | Max Size (in) | 0.000 |
| G Mpa | 82,500 | Min Size (mm) | 0.000 |
| G psi | 1,200,000 | Max Size (in) | 0.000 |
| Density g/cm3 | 8.180 | Surface Min | |
| Density lb/in3 | 0.295 | Max Temp °C | 350 |
| Conductivity | 0 | Max Temp °F | 660 |
All materials specifications are provided for general reference purposes only.
Nimonic 90 Springs Application:
Nimonic 90 Springs Notes:
| E Mpa | Young's Modulus | These factors can vary with cold work, heat treating and operational stress. | |
| E psi | |||
| G Mpa | Modulus of Rigidity | ||
| G psi | |||
| Conductivity | % IACS | ||
| Surface Min | Typical Surface Quality | a | Maximum defect depth: 0 to 0.5% of d or t |
| b | Maximum defect depth: 1.0% of d or t | ||
| c | Defect depth:less that 3.5% of d or t | ||
| Min Size | Sizes commonly available for wire or strip | Special sizes may be available at additional cost. | |
| Max Size | |||
| Max Temp | Maximum service temperature | May vary due to operating stress | |
