Material Type: Monel 400
Material Group: Nickel Base Alloy Wire
Cold drawn. Good corrosion resistance at moderately elevated temperatures.
Available Monel 400 Springs Material Forms
Wire: Yes Strip: Yes Sheet/Plate: Yes
Engineering Data
E Mpa | 179,000 | Min Size (in) | 0.002 |
E psi | 26,000,000 | Max Size (in) | 0.375 |
G Mpa | 66,200 | Min Size (mm) | 0.050 |
G psi | 9,600,000 | Max Size (in) | 9.500 |
Density g/cm3 | 8.830 | Surface Min | b |
Density lb/in3 | 0.319 | Max Temp °C | 230 |
Conductivity | 3.5 | Max Temp °F | 450 |
All materials specifications are provided for general reference purposes only.
E Mpa | Young's Modulus | These factors can vary with cold work, heat treating and operational stress. | |
E psi | |||
G Mpa | Modulus of Rigidity | ||
G psi | |||
Conductivity | % IACS | ||
Surface Min | Typical Surface Quality | a | Maximum defect depth: 0 to 0.5% of d or t |
b | Maximum defect depth: 1.0% of d or t | ||
c | Defect depth:less that 3.5% of d or t | ||
Min Size | Sizes commonly available for wire or strip | Special sizes may be available at additional cost. | |
Max Size | |||
Max Temp | Maximum service temperature | May vary due to operating stress |