Material Type: Inconel 600
Material Group: Nickel Base Alloy Wire
Cold drawn with good corrosion resistance at elevated temperatures.
Available Inconel 600 Springs Material Forms
Wire: Yes Strip: Yes Sheet/Plate: Yes
| E Mpa | 214,000 | Min Size (in) | 0.004 |
| E psi | 31,000,000 | Max Size (in) | 0.500 |
| G Mpa | 75,800 | Min Size (mm) | 0.100 |
| G psi | 11,000,000 | Max Size (in) | 12.500 |
| Density g/cm3 | 8.430 | Surface Min | b |
| Density lb/in3 | 0.304 | Max Temp °C | 320 |
| Conductivity | 1.5 | Max Temp °F | 700 |
All materials specifications are provided for general reference purposes only.
| E Mpa | Young's Modulus | These factors can vary with cold work, heat treating and operational stress. | |
| E psi | |||
| G Mpa | Modulus of Rigidity | ||
| G psi | |||
| Conductivity | % IACS | ||
| Surface Min | Typical Surface Quality | a | Maximum defect depth: 0 to 0.5% of d or t |
| b | Maximum defect depth: 1.0% of d or t | ||
| c | Defect depth:less that 3.5% of d or t | ||
| Min Size | Sizes commonly available for wire or strip | Special sizes may be available at additional cost. | |
| Max Size | |||
| Max Temp | Maximum service temperature | May vary due to operating stress | |
