Material Type: Brass
Material Group: N/A
Description:
Contact us with details on your specific needs for this material. There are many alloys available and we'd be glad to help you with your design.
Available Brass Springs Material Forms
Wire: No Strip: No Sheet/Plate: No
Engineering Data
| E Mpa | 0 | Min Size (in) | 0.000 |
| E psi | 0 | Max Size (in) | 0.000 |
| G Mpa | 0 | Min Size (mm) | 0.000 |
| G psi | 0 | Max Size (in) | 0.000 |
| Density g/cm3 | 0.000 | Surface Min | |
| Density lb/in3 | 0.000 | Max Temp °C | 0 |
| Conductivity | 0 | Max Temp °F | 0 |
All materials specifications are provided for general reference purposes only.
Brass Springs Application:
Brass Springs Notes:
| E Mpa | Young's Modulus | These factors can vary with cold work, heat treating and operational stress. | |
| E psi | |||
| G Mpa | Modulus of Rigidity | ||
| G psi | |||
| Conductivity | % IACS | ||
| Surface Min | Typical Surface Quality | a | Maximum defect depth: 0 to 0.5% of d or t |
| b | Maximum defect depth: 1.0% of d or t | ||
| c | Defect depth:less that 3.5% of d or t | ||
| Min Size | Sizes commonly available for wire or strip | Special sizes may be available at additional cost. | |
| Max Size | |||
| Max Temp | Maximum service temperature | May vary due to operating stress | |
