Home Materials MP35N


Material Type: Mp35n
Material Group: N/A

MP35N Springs Description:

Age hardenable nickel-cobalt base alloy with ultra high strength, toughness, ductility and outstanding corrosion resistance. Resists corrosion in hydrogen sulfide, salt water and other chloride solutions. Excellent resistance to crevice and stress corrosion cracking in sea water.

Available MP35N Springs Material Forms
Wire: Yes    Strip: Yes    Sheet/Plate: Yes

MP35N Spring Material Engineering Data

E Mpa 234,000 Min Size (in) 0.000
E psi 33,900,000 Max Size (in) 0.000
G Mpa 80,700 Min Size (mm) 0.000
G psi 7,100,000 Max Size (in) 0.000
Density g/cm3 8.430 Surface Min  
Density lb/in3 0.304 Max Temp °C 315
Conductivity 0 Max Temp °F 600

All materials specifications are provided for general reference purposes only.

MP35N Springs Application:

MP35N Springs Notes:

E Mpa Young's Modulus These factors can vary with cold work, heat treating and operational stress.
E psi
G Mpa Modulus of Rigidity
G psi
Conductivity % IACS
Surface Min Typical Surface Quality a Maximum defect depth: 0 to 0.5% of d or t
b Maximum defect depth: 1.0% of d or t
c Defect depth:less that 3.5% of d or t
Min Size Sizes commonly available for wire or strip Special sizes may be available at additional cost.
Max Size
Max Temp Maximum service temperature May vary due to operating stress