AISI 1074/1075 Springs Description:
The AISI 1074 and AISI 1075 carbon steel is cCold rolled and, available in annealed or tempered condition. The AISI 1074 and 1075 springs are mMost popular for flat springs.
Spring Engineers of Houston is dedicated to providing the best quality and timely spring and metal product manufacturing services. We are proudly certified to the latest ISO standards and offer quality control analysis and testing services. From design to production and packaging, we are committed to excellence. We also offer spring design assistance. Contact us today for assistance with the design of your spring.
Available AISI 1074/1075 Springs Material Forms
Wire: No Strip: Yes Sheet/Plate: Yes
Material Type: AISI 1074, 1075
Material Group: Carbon Strip
Engineering Data
| E Mpa | 207,000 | Min Size (in) | 0.003 |
| E psi | 30,000,000 | Max Size (in) | 0.125 |
| G Mpa | 79,300 | Min Size (mm) | 0.080 |
| G psi | 11,500,000 | Max Size (in) | 3.000 |
| Density g/cm3 | 7.860 | Surface Min | b |
| Density lb/in3 | 0.284 | Max Temp °C | 120 |
| Conductivity | 7 | Max Temp °F | 250 |
All materials specifications are provided for general reference purposes only.
AISI 1074/1075 Springs Notes:
| E Mpa | Young's Modulus | These factors can vary with cold work, heat treating and operational stress. | |
| E psi | |||
| G Mpa | Modulus of Rigidity | ||
| G psi | |||
| Conductivity | % IACS | ||
| Surface Min | Typical Surface Quality | a | Maximum defect depth: 0 to 0.5% of d or t |
| b | Maximum defect depth: 1.0% of d or t | ||
| c | Defect depth:less that 3.5% of d or t | ||
| Min Size | Sizes commonly available for wire or strip | Special sizes may be available at additional cost. | |
| Max Size | |||
| Max Temp | Maximum service temperature | May vary due to operating stress | |
