Home Materials Inconel X750 Spring

Inconel X750 Spring

Material Type: Inconel X750
Material Group: Nickel Base Alloy Wire

Inconel X750 Springs Description:

Cold drawn and precipitation hardened after fabrication. Alloy X-750 has good corrosion resistance at elevated temperatures. A high-strength nickel-chrome aluminum alloy. Inconel X750 is not suited for extension springs requiring initial tension.

Available Inconel X750 Spring Material Forms:

Wire: Yes    Strip: Yes    Sheet/Plate: Yes

Inconel X750 Engineering Data:

E Mpa 214,000 Min Size (in) 0.004
E psi 31,000,000 Max Size (in) 0.500
G Mpa 79,300 Min Size (mm) 0.100
G psi 11,500,000 Max Size (in) 12.500
Density g/cm3 8.250 Surface Min b
Density lb/in3 0.298 Max Temp °C 595
Conductivity 1 Max Temp °F 1100

All materials specifications are provided for general reference purposes only.

Inconel X750 Springs Application:

Inconel X750 Springs Notes:

E Mpa Young's Modulus These factors can vary with cold work, heat treating and operational stress.
E psi
G Mpa Modulus of Rigidity
G psi
Conductivity % IACS
Surface Min Typical Surface Quality a Maximum defect depth: 0 to 0.5% of d or t
b Maximum defect depth: 1.0% of d or t
c Defect depth:less that 3.5% of d or t
Min Size Sizes commonly available for wire or strip Special sizes may be available at additional cost.
Max Size
Max Temp Maximum service temperature May vary due to operating stress