Material Type: Mp35n
Material Group: N/A
Age hardenable nickel-cobalt base alloy with ultra high strength, toughness, ductility and outstanding corrosion resistance. Resists corrosion in hydrogen sulfide, salt water and other chloride solutions. Excellent resistance to crevice and stress corrosion cracking in sea water.
Available MP35N Springs Material Forms
Wire: Yes Strip: Yes Sheet/Plate: Yes
E Mpa | 234,000 | Min Size (in) | 0.000 |
E psi | 33,900,000 | Max Size (in) | 0.000 |
G Mpa | 80,700 | Min Size (mm) | 0.000 |
G psi | 7,100,000 | Max Size (in) | 0.000 |
Density g/cm3 | 8.430 | Surface Min | |
Density lb/in3 | 0.304 | Max Temp °C | 315 |
Conductivity | 0 | Max Temp °F | 600 |
All materials specifications are provided for general reference purposes only.
E Mpa | Young's Modulus | These factors can vary with cold work, heat treating and operational stress. | |
E psi | |||
G Mpa | Modulus of Rigidity | ||
G psi | |||
Conductivity | % IACS | ||
Surface Min | Typical Surface Quality | a | Maximum defect depth: 0 to 0.5% of d or t |
b | Maximum defect depth: 1.0% of d or t | ||
c | Defect depth:less that 3.5% of d or t | ||
Min Size | Sizes commonly available for wire or strip | Special sizes may be available at additional cost. | |
Max Size | |||
Max Temp | Maximum service temperature | May vary due to operating stress |