Home Materials Nimonic 90 Spring

Nimonic 90 Spring

Material Type: Nimonic 90
Material Group: N/A

Nimonic 90 Springs Description:

A nickel-chromium-cobalt alloy, precipitation hardenable with high stress-rupture strength. Widely used and proven alloy for high temperature conditions. Applications in aerospace and high temperature springs.

Available Nimonic 90 Springs Material Forms
Wire: Yes    Strip: No    Sheet/Plate: No

Engineering Data

E Mpa 227,000 Min Size (in) 0.000
E psi 33,000,000 Max Size (in) 0.000
G Mpa 82,500 Min Size (mm) 0.000
G psi 1,200,000 Max Size (in) 0.000
Density g/cm3 8.180 Surface Min  
Density lb/in3 0.295 Max Temp °C 350
Conductivity 0 Max Temp °F 660

All materials specifications are provided for general reference purposes only.

Nimonic 90 Springs Application:

Nimonic 90 Springs Notes:

E Mpa Young's Modulus These factors can vary with cold work, heat treating and operational stress.
E psi
G Mpa Modulus of Rigidity
G psi
Conductivity % IACS
Surface Min Typical Surface Quality a Maximum defect depth: 0 to 0.5% of d or t
b Maximum defect depth: 1.0% of d or t
c Defect depth:less that 3.5% of d or t
Min Size Sizes commonly available for wire or strip Special sizes may be available at additional cost.
Max Size
Max Temp Maximum service temperature May vary due to operating stress