Home Materials Inconel 600 Spring

Inconel 600 Spring

Material Type: Inconel 600
Material Group: Nickel Base Alloy Wire

Inconel 600 Springs Description:

Cold drawn with good corrosion resistance at elevated temperatures.

Available Inconel 600 Springs Material Forms
Wire: Yes    Strip: Yes    Sheet/Plate: Yes

Engineering Data

E Mpa 214,000 Min Size (in) 0.004
E psi 31,000,000 Max Size (in) 0.500
G Mpa 75,800 Min Size (mm) 0.100
G psi 11,000,000 Max Size (in) 12.500
Density g/cm3 8.430 Surface Min b
Density lb/in3 0.304 Max Temp °C 320
Conductivity 1.5 Max Temp °F 700

All materials specifications are provided for general reference purposes only.

Inconel 600 Springs Application:

Inconel 600 Springs Notes:

E Mpa Young's Modulus These factors can vary with cold work, heat treating and operational stress.
E psi
G Mpa Modulus of Rigidity
G psi
Conductivity % IACS
Surface Min Typical Surface Quality a Maximum defect depth: 0 to 0.5% of d or t
b Maximum defect depth: 1.0% of d or t
c Defect depth:less that 3.5% of d or t
Min Size Sizes commonly available for wire or strip Special sizes may be available at additional cost.
Max Size
Max Temp Maximum service temperature May vary due to operating stress