|
Material Type: Valve Spring
Material Group: Carbon Steel Wire
Valve Springs Description:
Cold drawn and heat treated before fabrication. Good surface
condition and uniform tensile strength.
Available Valve Springs Material Forms
Wire: Yes Strip: No Sheet/Plate: No
Engineering Data
| E Mpa |
207,000 |
Min Size (in) |
0.050 |
| E psi |
30,000,000 |
Max Size (in) |
0.250 |
| G Mpa |
79,300 |
Min Size (mm) |
1.300 |
| G psi |
11,500,000 |
Max Size (in) |
6.350 |
| Density g/cm3 |
7.860 |
Surface Min |
a |
| Density lb/in3 |
0.284 |
Max Temp °C |
150 |
| Conductivity |
7 |
Max Temp °F |
300 |
All materials specifications are provided for general reference purposes only. |
Valve Springs Application:
|
| E Mpa |
Young's
Modulus |
These factors can vary with cold work, heat treating and operational
stress. |
| E psi |
| G Mpa |
Modulus of
Rigidity |
| G psi |
| Conductivity |
% IACS |
| Surface
Min |
Typical
Surface Quality |
a |
Maximum defect depth:
0 to 0.5% of d or t |
| b |
Maximum defect depth:
1.0% of d or t |
| c |
Defect depth:less that
3.5% of d or t |
| Min Size |
Sizes
commonly available for wire or strip |
Special sizes may be available at additional cost. |
| Max Size |
| Max Temp |
Maximum service
temperature |
May vary
due to operating stress |
Valve Springs