|
 Material Type: Spring Brass, CA260
Material Group: Copper Base Alloy Strip
Description:
Used for mechanical springs where corrosion resistance is required
and where more expensive copper based alloys as unnecessary.
Available Brass Springs CA260 Material Forms
Wire: No Strip: Yes Sheet/Plate: No
Engineering Data
| E Mpa |
110,000 |
Min Size (in) |
0.004 |
| E psi |
16,000,000 |
Max Size (in) |
0.500 |
| G Mpa |
42,000 |
Min Size (mm) |
0.100 |
| G psi |
6,000,000 |
Max Size (in) |
12.500 |
| Density g/cm3 |
8.530 |
Surface Min |
b |
| Density lb/in3 |
0.308 |
Max Temp °C |
95 |
| Conductivity |
17 |
Max Temp °F |
200 |
All materials specifications are provided for general reference purposes only. |
Brass Springs CA260 Application:
|
| E Mpa |
Young's
Modulus |
These factors can vary with cold work, heat treating and operational
stress. |
| E psi |
| G Mpa |
Modulus of
Rigidity |
| G psi |
| Conductivity |
% IACS |
| Surface
Min |
Typical
Surface Quality |
a |
Maximum defect depth:
0 to 0.5% of d or t |
| b |
Maximum defect depth:
1.0% of d or t |
| c |
Defect depth:less that
3.5% of d or t |
| Min Size |
Sizes
commonly available for wire or strip |
Special sizes may be available at additional cost. |
| Max Size |
| Max Temp |
Maximum service
temperature |
May vary
due to operating stress |
Brass Springs CA260