|
 Material Type: Rene 41
Material Group: N/A
Description:
A nickel base superalloy, nickel chromium cobalt, used in jet and
rocket engines, afterburners and torque rings Contact us for Engineering
data consistent with your design requirements.
Available Rene 41 Springs Material Forms
Wire: Yes Strip: No Sheet/Plate: No
Engineering Data
| E Mpa |
0 |
Min Size (in) |
0.000 |
| E psi |
0 |
Max Size (in) |
0.000 |
| G Mpa |
0 |
Min Size (mm) |
0.000 |
| G psi |
0 |
Max Size (in) |
0.000 |
| Density g/cm3 |
0.000 |
Surface Min |
|
| Density lb/in3 |
0.000 |
Max Temp °C |
0 |
| Conductivity |
0 |
Max Temp °F |
0 |
All materials specifications are provided for general reference purposes only. |
Rene 41 Springs Application:
|
| E Mpa |
Young's
Modulus |
These factors can vary with cold work, heat treating and operational
stress. |
| E psi |
| G Mpa |
Modulus of
Rigidity |
| G psi |
| Conductivity |
% IACS |
| Surface
Min |
Typical
Surface Quality |
a |
Maximum defect depth:
0 to 0.5% of d or t |
| b |
Maximum defect depth:
1.0% of d or t |
| c |
Defect depth:less that
3.5% of d or t |
| Min Size |
Sizes
commonly available for wire or strip |
Special sizes may be available at additional cost. |
| Max Size |
| Max Temp |
Maximum service
temperature |
May vary
due to operating stress |
Rene 41 Springs