|
 Material Type: Oil Tempered
Material Group: Carbon Steel Wire
Oil Tempered Springs Description:
Cold drawn and heat treated before fabrication. General purpose
spring wire. Moderately priced material, good for shock and impact
resistance, good fatigue properties. Subject to hydrogen embrittlement
if plated.
Available Oil Tempered Springs Material Forms
Wire: Yes Strip: No Sheet/Plate: No
Engineering Data
| E Mpa |
207,000 |
Min Size (in) |
0.020 |
| E psi |
30,000,000 |
Max Size (in) |
0.625 |
| G Mpa |
79,000 |
Min Size (mm) |
0.500 |
| G psi |
11,500,000 |
Max Size (in) |
16.000 |
| Density g/cm3 |
7.860 |
Surface Min |
c |
| Density lb/in3 |
0.284 |
Max Temp °C |
150 |
| Conductivity |
7 |
Max Temp °F |
300 |
All materials specifications are provided for general reference purposes only. |
Oil Tempered Springs Application:
|
| E Mpa |
Young's
Modulus |
These factors can vary with cold work, heat treating and operational
stress. |
| E psi |
| G Mpa |
Modulus of
Rigidity |
| G psi |
| Conductivity |
% IACS |
| Surface
Min |
Typical
Surface Quality |
a |
Maximum defect depth:
0 to 0.5% of d or t |
| b |
Maximum defect depth:
1.0% of d or t |
| c |
Defect depth:less that
3.5% of d or t |
| Min Size |
Sizes
commonly available for wire or strip |
Special sizes may be available at additional cost. |
| Max Size |
| Max Temp |
Maximum service
temperature |
May vary
due to operating stress |
Oil Tempered Springs