|
 Material Type: Mp35n
Material Group: N/A
MP35N Springs Description:
Age hardenable nickel-cobalt base alloy with ultra high strength,
toughness, ductility and outstanding corrosion resistance. Resists
corrosion in hydrogen sulfide, salt water and other chloride solutions.
Excellent resistance to crevice and stress corrosion cracking in sea
water.
Available MP35N Springs Material Forms
Wire: Yes Strip: Yes Sheet/Plate: Yes
Engineering Data
| E Mpa |
234,000 |
Min Size (in) |
0.000 |
| E psi |
33,900,000 |
Max Size (in) |
0.000 |
| G Mpa |
80,700 |
Min Size (mm) |
0.000 |
| G psi |
7,100,000 |
Max Size (in) |
0.000 |
| Density g/cm3 |
8.430 |
Surface Min |
|
| Density lb/in3 |
0.304 |
Max Temp °C |
315 |
| Conductivity |
0 |
Max Temp °F |
600 |
All materials specifications are provided for general reference purposes only. |
MP35N Springs Application:
|
| E Mpa |
Young's
Modulus |
These factors can vary with cold work, heat treating and operational
stress. |
| E psi |
| G Mpa |
Modulus of
Rigidity |
| G psi |
| Conductivity |
% IACS |
| Surface
Min |
Typical
Surface Quality |
a |
Maximum defect depth:
0 to 0.5% of d or t |
| b |
Maximum defect depth:
1.0% of d or t |
| c |
Defect depth:less that
3.5% of d or t |
| Min Size |
Sizes
commonly available for wire or strip |
Special sizes may be available at additional cost. |
| Max Size |
| Max Temp |
Maximum service
temperature |
May vary
due to operating stress |
MP35N Springs