|
 Material Type: Hastelloy
Material Group: N/A
Hastelloy Springs Description:
A nickel-chrome-moly alloy with good corrosion resistance. Some
grades add copper or tungsten for further enhancement of chemical
resistance and pitting.
Available Hastelloy Springs Material Forms
Wire: Yes Strip: Yes Sheet/Plate: No
Engineering Data
| E Mpa |
206,000 |
Min Size (in) |
0.000 |
| E psi |
29,900,000 |
Max Size (in) |
0.000 |
| G Mpa |
79,000 |
Min Size (mm) |
0.000 |
| G psi |
700,000 |
Max Size (in) |
0.000 |
| Density g/cm3 |
8.640 |
Surface Min |
|
| Density lb/in3 |
0.312 |
Max Temp °C |
400 |
| Conductivity |
0 |
Max Temp °F |
750 |
All materials specifications are provided for general reference purposes only. |
Hastelloy Springs Application:
|
| E Mpa |
Young's
Modulus |
These factors can vary with cold work, heat treating and operational
stress. |
| E psi |
| G Mpa |
Modulus of
Rigidity |
| G psi |
| Conductivity |
% IACS |
| Surface
Min |
Typical
Surface Quality |
a |
Maximum defect depth:
0 to 0.5% of d or t |
| b |
Maximum defect depth:
1.0% of d or t |
| c |
Defect depth:less that
3.5% of d or t |
| Min Size |
Sizes
commonly available for wire or strip |
Special sizes may be available at additional cost. |
| Max Size |
| Max Temp |
Maximum service
temperature |
May vary
due to operating stress |
Hastelloy Springs