|
 Material Type: Copper
Material Group: N/A
Description:
Contact us with details on your specific needs for this material.
There are many alloys available and we'd be glad to help you with your
design.
Available Copper Springs Material Forms
Wire: No Strip: No Sheet/Plate: No
Engineering Data
| E Mpa |
0 |
Min Size (in) |
0.000 |
| E psi |
0 |
Max Size (in) |
0.000 |
| G Mpa |
0 |
Min Size (mm) |
0.000 |
| G psi |
0 |
Max Size (in) |
0.000 |
| Density g/cm3 |
0.000 |
Surface Min |
|
| Density lb/in3 |
0.000 |
Max Temp °C |
0 |
| Conductivity |
0 |
Max Temp °F |
0 |
All materials specifications are provided for general reference purposes only. |
Copper Springs Application:
|
| E Mpa |
Young's
Modulus |
These factors can vary with cold work, heat treating and operational
stress. |
| E psi |
| G Mpa |
Modulus of
Rigidity |
| G psi |
| Conductivity |
% IACS |
| Surface
Min |
Typical
Surface Quality |
a |
Maximum defect depth:
0 to 0.5% of d or t |
| b |
Maximum defect depth:
1.0% of d or t |
| c |
Defect depth:less that
3.5% of d or t |
| Min Size |
Sizes
commonly available for wire or strip |
Special sizes may be available at additional cost. |
| Max Size |
| Max Temp |
Maximum service
temperature |
May vary
due to operating stress |
Copper Springs