|
 Material Type: Austenitic Types 301, 302
Material Group: Stainless Steel Strip
Description:
Type 301 is cold rolled to high yield strength. Magnetic in spring
temper. Type 302 is cold rolled and used for general purpose
applications with corrosion and heat resistance.
Available 301 Stainless Steel Springs Material Forms
Wire: No Strip: Yes Sheet/Plate: Yes
Engineering Data
| E Mpa |
193,000 |
Min Size (in) |
0.003 |
| E psi |
28,000,000 |
Max Size (in) |
0.063 |
| G Mpa |
69,000 |
Min Size (mm) |
0.080 |
| G psi |
10,000,000 |
Max Size (in) |
1.500 |
| Density g/cm3 |
7.920 |
Surface Min |
b |
| Density lb/in3 |
0.286 |
Max Temp °C |
315 |
| Conductivity |
2 |
Max Temp °F |
600 |
All materials specifications are provided for general reference purposes only. |
301 Stainless Steel Springs Application:
|
| E Mpa |
Young's
Modulus |
These factors can vary with cold work, heat treating and operational
stress. |
| E psi |
| G Mpa |
Modulus of
Rigidity |
| G psi |
| Conductivity |
% IACS |
| Surface
Min |
Typical
Surface Quality |
a |
Maximum defect depth:
0 to 0.5% of d or t |
| b |
Maximum defect depth:
1.0% of d or t |
| c |
Defect depth:less that
3.5% of d or t |
| Min Size |
Sizes
commonly available for wire or strip |
Special sizes may be available at additional cost. |
| Max Size |
| Max Temp |
Maximum service
temperature |
May vary
due to operating stress |
301 Stainless Steel Springs