|
 Material Type: Austenitic Type 302
Material Group: Stainless Steel Wire
302 Stainless Steel Springs Description:
Cold drawn general purpose corrosion and heat resistant. Magnetic in
spring temper/hard drawn condition. Lowest cost stainless.
Available 302 Stainless Steel Springs Material Forms
Wire: Yes Strip: Yes Sheet/Plate: Yes
Engineering Data
| E Mpa |
193,000 |
Min Size (in) |
0.005 |
| E psi |
28,000,000 |
Max Size (in) |
0.375 |
| G Mpa |
69,000 |
Min Size (mm) |
0.130 |
| G psi |
10,000,000 |
Max Size (in) |
9.500 |
| Density g/cm3 |
7.920 |
Surface Min |
b |
| Density lb/in3 |
0.286 |
Max Temp °C |
260 |
| Conductivity |
2 |
Max Temp °F |
500 |
All materials specifications are provided for general reference purposes only. |
302 Stainless Steel Springs Application:
|
| E Mpa |
Young's
Modulus |
These factors can vary with cold work, heat treating and operational
stress. |
| E psi |
| G Mpa |
Modulus of
Rigidity |
| G psi |
| Conductivity |
% IACS |
| Surface
Min |
Typical
Surface Quality |
a |
Maximum defect depth:
0 to 0.5% of d or t |
| b |
Maximum defect depth:
1.0% of d or t |
| c |
Defect depth:less that
3.5% of d or t |
| Min Size |
Sizes
commonly available for wire or strip |
Special sizes may be available at additional cost. |
| Max Size |
| Max Temp |
Maximum service
temperature |
May vary
due to operating stress |
302 Stainless Steel Springs